This 26-inch tandem shaft true line perforator can
(in one pass) perforate and
score with virtually unlimited intricate applications. Models are
available in Vacuum or Friction Feed. A perfect choice
for your finishing equipment needs.
Rosback Model 226 Tandem Shaft True Line Perforator Features
Top-loading automatic continuous vacuum or friction-feed
Dual-shaft adjustable depth control
Micrometer side-guide adjustment
All ball-bearing construction
Able to add 20 heads and more.*
Handles material weights from 9# onionskin 1/16"-thick card stock
D.C. motor control from 1,000 to 24,000 f/h
Heavy-duty 3/4 hp motor
*Greatly depends on stock to be run
Model 226 Tandem Shaft True
Line Perforator Specs
Maximum sheet size:
26" W x 26" L
66 cm x 66 cm
Minimum sheet size:
3" W x 3" L
7.6 cm x 7.6 cm
Minimum space between standard lines of perforation:
(single shaft)
3/4"
(1/2" available)
1.9 cm
(double shaft)
unlimited
Standard edge margin:
3/4"
Narrow margin of 3/8" available
1.9 cm
Length, front to back:
64"
162.6 cm
Width, side to side:
38"
96.5 cm
Height:
45"
114 cm
Net weight (friction):
380 lbs
173 kg
Net weight (vacuum):
470 lbs
213 kg
Shipping weight (friction):
473 lbs
215 kg
Shipping weight (vacuum):
560 lbs
254 kg
Export shipping weight (friction):
570 lbs
259 kg
Export shipping weight (vacuum):
670 lbs
304 kg
Standard electrics (friction): 115v/60hz/1ph
5 amps*
Standard electrics
(vacuum): Additional 115v/60hz/1ph 15 amp (circuit breaker required)
*Contact ROSBACK
for alternate electrical requirements.
NEW Option! The Gap Feed Option
for the Rosback Vacuum TrueLine allows feeding onto a 248 or 249 Cross
Perforator, or onto a right angle folder. Simple controls let the operator
set the gap between sheets, ensuring a consistent product stream. Whether
right angle perforating, scoring and folding, or simply sheet feeding, the
gap feed option makes the industries best vacuum feeder even better.
* Greatly depends on stock to be run.
Standard True Line Perforator Features:
4 sets of perforating heads with burr rollers
2 set of scoring/creasing head
4 sets of drive rollers
1 set of tools
8 extra perforator blades
Miscellaneous extra parts
Finishing Equipment Accessories:
Perforating heads with burr rollers
Narrow margin 3/8" perforating heads
Special 1/2" slot perforating heads (between lines of
perforation)
*The optional slitting attachment for pressure
sensitive material permits partial slitting of stock. Due to the
consistent depth control required pressure sensitive slitting is recommended
only on the Model 223, 226 & 240 Series Perforators.
